- Shrink tubing fitted with a strap and a metal “D” ring – SLS. This solution allows you to add an attachment point to all types of products and make them compatible with lanyards and carabiners from the facom sls range. Examples: special tools, pens, sprays etc.The strap surrounds the shrink tubing for strength and maximum security for all.
- Fabric resistant to common solvents.
- Sheath equipped with an adhesive which becomes liquid with the heat during the retraction of the sheath. optimum temperature of withdrawal: between 150 and 300 ° depending on the thickness and diameter of the sheath.Excellent adhesion on most substrates: crude steel, chrome or phosphate, aluminum, wood, plastic, …Precautions: – Clean and degrease the product that will receive the shrink tubing. – Select the correct diameter of shrink-hose according to the allocation table. – Identify a location where the sheath will not harm ergonomics. If possible, choose a location where the sheath can not escape once retracted.- Respect the maximum weight recommended. – Heat the sheath about 3cm away with a standard heat gun Facom E.2015. Be careful not to burn the strap.- Allow to cool for 5 minutes to obtain optimum adhesion of the glue. – Check the bond. – Check the equipment periodically.
SLS.G89 | |
---|---|
Diameter [mm] | 105.0 |
Diameter D Mini – Maxi [mm] | 51 – 89 |
Length L1 [mm] | 135.0 |
Length L2 [mm] | 25.0 |
Height H [mm] | 105.0 |
Weight [g] | 95.0 |
Reviews
There are no reviews yet.